Sharp MD-MT170E - Inserting a Minidisc

01/10/26 MD-MT170E_2.fm
11
MD-MT170E
Preparation
-Inserting a MiniDisc-
Inserting a MiniDisc
Notes:

Do not place the MiniDisc under the holder.

If any resistance is felt, do not force the MiniDisc into
the unit, as it may cause damage to the unit. If resist-
ance is felt, remove the MiniDisc and reload it.

The lid cannot be opened if "TOC" is displayed; refer
to the instruction on page 13.
Recording
prevented
Recordable
When you record on a MiniDisc,
check that the erase prevention
tab is set to the "Recordable"
position.
1
Slide the OPEN lever to release the com-
partment door.
2
Lift it up.
3
Insert a MiniDisc as shown.
4
Close the compartment door.