Sharp MD-MT170E - Error Messages

01/10/26 MD-MT170E_6.fm
38
MD-MT170E
References
-Error Messages-
Error Messages
Number or symbol appears in (*) position.
ERROR MES-
SAGES
MEANING
BATT EMPTY

The battery has run down.
BLANK MD

Nothing is recorded.
(Replace the disc with a recorded disc.)
Can't COPY

You tried to record from a copy prohib-
ited MiniDisc.
(Record using the analogue cable.)

You tried to record signals other than
music (such as data).
Can't EDIT

A track cannot be edited.
(Change the stop position of the track and
then edit it.)
Can't PLAY

You tried to play back a track that can-
not be played with this equipment.
Can't READ (*)

The disc data cannot be read because
the disc is damaged.
(Reload the Minidisc or replace it with an-
other one.)
Can't REC

Recording cannot be performed cor-
rectly due to vibration or shock.
ERROR MES-
SAGES
MEANING
Can'tSTAMP

Stamp function does not work.
(Check the number of tracks.)
Can'tWRITE

Cannot save the TOC information cor-
rectly to a MiniDisc.
DEFECT!

The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
DISC FULL

The disc is out of recording space.
Er-MD (**)

The microprocessor has reported a
system fault and the unit is out of or-
der.
(To have it repaired, go to the distributor
where you purchased the unit.)
HOLD

The unit is in the hold mode.
LOCKED

You removed a MiniDisc whilst record-
ing or editing.
(Turn off the power before removing the
MiniDisc.)
NO DISC

A disc has not been loaded.