Sharp MD-MT270H - Power Source; Using with the AC Adaptor; Using with the Alkaline Battery

02/11/7 MD_MT270H_SEEG_E2.fm
E-5
MD-MT270H
ENGLISH
Power Source
-AC Adaptor/Alkaline Battery-
Using with the AC Adaptor
Plug the AC adaptor into the wall socket, and then insert the
plug on the other end into the DC IN 5V socket.
Caution:
! Insert the plugs firmly.
! When the unit is not in use for extended periods, remove
the AC adaptor from the wall socket.
Note:
If power failure occurs whilst playing a disc using the AC
adaptor, disconnect it from the wall socket. Otherwise, play-
back may start automatically when electricity resumes.
Using with the Alkaline Battery
Use one commercially available alkaline battery (LR6,
"AA" size).
1
Push and slide the battery cover.
2
Open the battery cover.
3
Insert an alkaline battery.
4
Close the battery cover.
Caution:
! Do not replace the battery during operation.
! Do not use a rechargeable battery (nickel-cad-
mium battery etc.).
! Remove the battery if the unit will not be used for long
periods of time. This will prevent potential damage due to
battery leakage.
! Installing the battery incorrectly may cause the unit to mal-
function.
Note:
For information about the battery life, see "Specifications"
on page 38.
AC 230V,
50/60 Hz
To the DC IN 5V socket
When inserting or removing the battery, push it to-
wards the battery terminal.
4321