Sharp MD-MT270H - Advanced Features; Titling a MiniDisc

02/11/7 MD_MT270H_SEEG_E5.fm
E-23
MD-MT270H
ENGLISH
Advanced Features
-Titling a MiniDisc-
Titling a MiniDisc
! Creating disc and track names
Load a MiniDisc to be named. A playback only or record-
ing prevented MiniDisc cannot be edited.
1
<Disc name> <Track name>
Whilst in the stop
mode, press the MENU/
ENTER button.
Whilst in the pause
mode, press the MENU/
ENTER button.
2
Press the or button repeatedly to select
"EDIT".
3
Press the MENU/ENTER button.
4
<Disc name> <Track name>
Press the or but-
ton repeatedly to select
"DISC NAME".
Press the or but-
ton repeatedly to select
"TRACK NAME".
5
Press the MENU/ENTER button.
" The unit will enter the character input mode.
" To cancel the operation, press the :OFF/HOLD
button.
Cursor
6
Press the button repeatedly to select the type
of characters.
The first 3 characters in the group of the selected
characters will be displayed for about 1 second.
7
Press the or button repeatedly to select the
letter.
8
Press the MENU/ENTER button to enter it.
Position where the next letter will be entered
Note:
Complete the operation within 7 seconds whilst select-
ing the menus.
(Capital letters) (Lower-case letters) (Numbers and symbols)