02/11/7 MD_MT270H_SEEG_E6.fm
E-36
MD-MT270H
ENGLISH
References
-Error Messages-
A number or symbol appears in (*) position.
ERROR MES-
SAGES
MEANING
NO SIGNAL " Poor connection of the digital cable.
" No output signal comes out from the
connected unit.
(Use the AC power for the connected unit.)
" The input signal has improper sampling
frequency.
PLAY MD " You tried to record on a playback-only
disc.
PROTECTED " The write protection tab of a MiniDisc is
set to the protected position.
" You tried to record on a playback-only
disc.
SORRY " Since a track number is currently being
located or updated, the unit cannot ac-
cept your command.
(Wait for a while and try the operation
again.)
ERROR MES-
SAGES
MEANING
TEMP OVER " The temperature is too high.
(Turn off the power, and wait for a while.)
TOC FORM
(**)
" There is an error in the recording sig-
nal.
(Erase all of the tracks, and then record
again.)
TOC FULL " There is no space left for recording
character information (track names,
disc names, etc.).
Tr. Protect " The track has been protected from be-
ing erased.
(Edit the track with the device on which it
was recorded.)
? DISC " A disc which contains data other than
music was played.
(A disc which contains nonmusic data can-
not be played.)
" There is an error in the signal recorded
on the disc.
To Next Page
Loading...
