70
4
Press the [COLOUR START] key
( ) or the [BLACK & WHITE
START] key ( ) to scan the first set of
originals.
Scanning begins.
To cancel scanning...
Press the [STOP] key ( ).
5
Insert the next set of originals and press
the [COLOUR START] key ( ) or
the [BLACK & WHITE START] key ( ).
You must use the same [START] key that you used to scan the
first set of originals to scan each of the remaining sets.
Repeat this step until all originals have been scanned.
To cancel scanning...
Press the [STOP] key ( ).
6
Touch the [Read-End] key.
To cancel copying...
Press the [STOP] key ( ).
If the Quick File Folder of the document filing function is full, copying in job build mode will be affected. Delete unneeded files
from the Quick File Folder.
To cancel the job build setting....
Touch the [Job Build] key in the screen of step 3 so that it is not highlighted.
or
or
Place next original. Press [Start].
When finished, press [Read-End].
Read-End
To Next Page
Loading...
