Sharp MX-2610N - Page 63

SHARP
TECHNICAL BULLETIN INDEX
63
Reference
Description
Model
COP2087
Sharp Remote Device Manager [SRDM] v1.4
All
COP2082
Measures against H3-00 error code caused by the electrostatic discharge
MX-DE13/14
COP2081
Countermeasures against L4-06 error code.
All
COP2080
Further improvement to prevent 2nd transfer belt meandering.
All
COP2076
Elimination of two springs to improve productivity.
MX-FN10
COP2074
Countermeasures against noise from the paper feed section of the manual
bypass unit.
MX-3610N
COP2073
Rom version upgrade
MX-FN10/FN17
COP2072
How to enable and configure the wireless function with MXEB13 USB wireless
adaptor.
All
COP2056
Measures to reduce the noise from the rear side of RSPF paper feed section
All
COP2051
Modification of Control PWB
MX-FN17
COP2046
Firmware version upgrade and change of transport motor
MX-DE13/14
COP2044
Registry growth when using an auto created printer under a Citrix or terminal
services environment.
All
COP2024
Elimination of the LCD protect molt of 10.1” operation panel for productivity
improvement.
All
COP2020
Change of Photo sensor
All
COP2012
Countermeasures against noise caused by the vibration of heavily
contaminated cleaning web roller.
All
COP2008
Caution when replacing the fusing pressure spring.
All
COP2007
Countermeasures against toner dispersion from the DV unit when printing in
high coverage and high volume.
All
COP2001
Countermeasures against noise from the transport follow roller in the RSPF
base tray.
All
COP2000
Countermeasures against noise from the reading rear roller within the RSPF
transport section.
All
COP1995
Improvement to strengthen the hinge mounting section on the SPF base tray.
All
COP1985
Countermeasures to prevent noise from the main drive unit.
All
COP1982
Improvement for gap variation between the fusing separate plate and fusing
belt.
All
COP1975
Countermeasures against transfer cleaning blade flip
All
COP1970
Elimination of the remain detect cover
MX-DE12/13/14
COP1959
Support for MXEB13 USB Wireless Adaptor
All
COP1952
Enhancement to prevent the POD2 actuator of the delivery lower PG coming
off.
All
COP1950
Sharp Remote Device Manager [SRDM] v1.3
All
COP1945
Release of Pantone Look-up Table for Pantone licensed devices
All
COP1942
Improvement against noise from the RSPF/DSPF transport section
All
COP1935
Improvement for engagement between the main drive unit & process unit
All
COP1933
Improvement against noise from the paper feed drive unit section
All
COP1926
Measures to prevent paper jam caused by worn transport ribs on the Cover
Top
MX-FN10
COP1919
Countermeasure for deviation of punch hole position
MX-FN10/PNX5
COP1914
Measures to prevent paper jam caused by unhooked bunch roller pressure
lever
MX-FN17