Sharp MX-2614N

SHARP
TROUBLE CODES
49
A0
01
PCU ROM abnormality
02
SCU ROM abnormality
10
Colour profile error
11
Firmware discrepancy (MFP-PCU)
15
Incompatible DSK Boot and program
firmware version
16
Data error of Energy Saving NIC firmware
on SD card.
20
Firmware & EEPROM conflict (MFP)
21
Firmware & EEPROM conflict (PCU)
22
Firmware & EEPROM conflict (SCU)
C1
10
Main charger trouble (Monochrome)
14
Main charger trouble (Colour)
C4
00
PTC trouble (TC high voltage)
CE
00
Network communication error
01
Network card is not installed or defective
02
FTP or Mail server is not found
03
Specified server does not correspond
during transmission
04
Invalid account/password (FTP server)
05
Invalid directory entered (FTP server)
06
Specified mail server (POP3) is not found
07
Invalid server account or password
08
The specified mail server (POP3) suspends
response
E7
01
MFP image data trouble.
03
HDD trouble.
04
HDD-ASIC error.
07
SD Card error
10
Shading trouble (Black correction).
11
Shading trouble (White correction).
14
CCD-ASIC communication error.
20
LSU laser detection error (K).
21
LSU laser detection error (C).
22
LSU laser detection error (M).
23
LSU laser detection error (Y).
28
LSU-PCU connection trouble
E7
29
LSU-ASIC frequency abnormality.
49
Watermark data error
50
Firmware & PWB combination error
55
PCU PWB information sum error
60
MFP combination error (Firmware/PWB)
61
MFP-PCU combination error
65
MFP EEPROM sum check error (26/31cpm)
80
MFP-SCU communication trouble.
89
Communication error between MFP PWB
& Energy Saving NIC controllers.
90
MFP-PCU communication trouble.
91
Fax reception image data error
92
Copy image data error
93
Image data process error.
94
Image data process error (import data)
95
Printer PWB DIMM memory check error.
96
MFP PWB DIMM memory check error.
EE
EC
Auto DV adjustment trouble.
EL
Auto DV adjustment trouble (over toned).
EU
Auto DV adjustment trouble (under toned).
F1
00
Finisher-PCU PWB communication error.
03
Finisher exit roller lifting operation trouble
08
Finisher staple shift motor trouble.
10
Finisher staple operation trouble.
15
Finisher exit tray lift operation trouble.
19
Finisher alignment operation trouble F.
20
Finisher alignment operation trouble R
21
Finisher interface fan motor trouble.
33
Punch unit shift operation trouble.
34
Punch operation trouble.
37
Finisher data backup RAM error.
50
Finisher incompatibility trouble.
F2
22
Discharge lamp trouble (K)
23
Discharge lamp trouble (C)
24
Discharge lamp trouble (M)
25
Discharge lamp trouble (Y)
39
Process temperature sensor trouble
40
Toner density sensor trouble (K)
41
Toner density sensor trouble (C)