Sharp MX-2640N

18
Basic Specifications / Copier specifications
Name
MX-2640N/MX-3140N/MX-3640N
Type
Desktop
Color
Full color
Copier system
Laser electrostatic copier
Scanning
resolution
Scan (B/W): 600 × 600 dpi, 600 × 400 dpi, 600 × 300 dpi
Scan (full color): 600 × 600 dpi
Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi
Gradation
Scan: equivalent to 256 levels / Print: equivalent to 256 levels
Original paper
sizes
Max. 11" x 17” (A3) for sheets and bound documents
Copy sizes
12" × 18" (A3 wide) to 5-1/2" × 8-1/2"R (A5R), Transparency film, Heavy paper, Envelopes
Tray 1-4*: 11" × 17", 8-1/2" × 14", 8-1/2" × 13-1/2", 8-1/2" × 13-2/5",
8-1/2" × 13", 8-1/2" × 11", 8-1/2" × 11"R, 7-1/4 × 10-1/2"R,
5-1/2" × 8-1/2"R, A3, B4, A4, A4R, B5, B5R, A5R
Multi-bypass tray: 12" × 18" (A3 wide) to 5-1/2" × 8-1/2"R (A5R), Transparency film, Heavy paper,
Envelopes, Long size paper (3-35/64" to 12" × 18" to 47-15/64" (90 to 305 mm × 458 to 1,200 mm))
Lost margin (leading edge): 11/64" (4 mm) ± 3/64" (± 1 mm)
Lost margin (trailing edge): 6/64" (2 mm) - 13/64" (- 5 mm)
Leading edge / trailing edge: total 21/64" (8 mm) or less
Near edge / far edge: total 11/64" (4 mm) ± 6/64" (± 2 mm) or less
* When the Stand/500&2000 sheet paper drawer is installed, only 8-1/2" × 11"(A4) can be used in
trays 3 and 4.
Warm-up time
18 seconds
 This may vary depending on the ambient conditions.
First-copy time
MX-2640N MX-3140N MX-3640N
Full color: 8.1 seconds 7.9 seconds 6.8 seconds
B/W: 5.9 seconds 5.8 seconds 5.2 seconds
 This may vary depending on the state of the machine.
Continuous
copying speeds*
(when shifter is
not in operation)
MX-2640N
8-1/2" × 11", A4 7-1/4" × 10-1/2", B5 26 copies/min.
8-1/2" × 11"R, A4R 7-1/4" × 10-1/2"R, B5R 19 copies/min.
8-1/2" × 14", B4 16 copies/min.
11" × 17", A3 14 copies/min.
* Continuous speed for same original source. Output may be
temporarily interrupted to stabilize image quality.
MX-3140N
31 copies/min.
20 copies/min.
17 copies/min.
15 copies/min.
MX-3640N
36 copies/min.
23 copies/min.
20 copies/min.
17 copies/min.
Copy ratios
Same size: 1:1 ± 0.8 % Enlarge: 121 %, 129 %, 200 %, 400 %
Reduce: 50 %, 64 %, 77 %
Zoom range: 25 to 400 % (25 - 200 % using RSPF) in 1 % increments, total 376
increments. Can calculate zoom rate when mm is specified.
Paper feed / capacity
500 sheets in one tray plus 100-sheet multi-bypass tray
 Using 21 lbs. bond (80 g/m
2
) weight paper
Max. paper feed / max. capacity
6,600 sheets in 4 trays (500 × 2 + 1,150 + 850) plus 100-sheet multi-bypass
tray plus 3,500 sheets in large capacity tray
 Using 21 lbs. bond (80 g/m
2
) weight paper
Continuous copy
Max. 999 copies
Memory
Standard: 4 GB HDD: 320 GB
 1 GB = One billion bytes when referring to hard drive capacity. Actual
format capacity is less.
Ambient
environment
Operating
environment
54 °F (10 °C) to 91 °F (35 °C) (20 % to 85 % RH) 590 - 1,013 hpa
Standard
environment
68 °F (20 °C) to 77 °F (25 °C) (65 ± 5 % RH)
Required power supply
AC 120V ±10% 60Hz
Power consumption Max. 1.44 kW (including options such as the desk)
Dimensions
MX-2640N/MX-3140N
23-15/16" (W) × 25-61/64" (D) × 32-27/32" (H)
(608 mm (W) × 659 mm (D) × 834 mm (H))
MX-3640N
23-15/16" (W) × 26-13/16" (D) × 32-27/32" (H)
(608 mm (W) × 681 mm (D) × 834 mm (H))
Weight
Approx. 167.6 lbs. (76 kg)
Overall
dimensions
With multi-bypass
tray extended
MX-2640N/MX-3140N
34-1/2" (W) × 25-61/64" (D)
(876 mm (W) × 659 mm (D))
MX-3640N
34-1/2" (W) × 26-13/16" (D)
(876 mm (W) × 681 mm (D))
With right side exit
tray extended
MX-2640N/MX-3140N
38-29/32" (W) × 25-61/64" (D)
(988 mm (W) × 659 mm (D))
MX-3640N
38-29/32" (W) × 26-13/16" (D)
(988 mm (W) × 681 mm (D))
SPECIFICATIONS