21
Type
Built-in type
Continuous print speed
Same as continuous copy speed
Resolution
Data processing: 600 × 600 dpi, 1,200 × 1,200 dpi
Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi, 1,200 × 1,200 dpi
Page description language
Standard: PCL6 emulation, Adobe
®
PostScript
®
3™, XPS*
Compatible protocols
TCP/IP (IPv4/IPv6), IPX/SPX, IPP, EtherTalk
Compatible OS
Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008,
Windows 7
Macintosh (Mac OS X 10.4.11, 10.5 ~ 10.5.8, 10.6 ~ 10.6.8, 10.7 ~ 10.7.2)
Internal fonts
80 fonts for PCL, 136 fonts for Adobe
®
PostScript
®
3™
Memory
Machine system memory and hard disk
Interface
10BASE-T/100BASE-TX/1000BASE-T, USB 2.0 (high speed mode)
* XPS stands for XML Paper Specification. When equipped with the XPS expansion kit (MX-PUX1).
Network Printer Specifications
Fax Specifications
Name
Facsimile expansion kit (MX-FX11)
Useable lines
General phone lines (PSTN), private branch exchange (PBX)
Scanning line density
Normal characters: 8 dot/mm × 3.85 chars/mm
Small characters: 8 dot/mm × 7.7 line/mm
Fine characters: 8 dot/mm × 15.4 line/mm
High-definition: 16 dot/mm × 15.4 line/mm
Connection speed
Super G3: 33.6 kbps, G3: 14.4 kbps
Coding method
MH, MR, MMR, JBIG
Connection mode
Super G3 / G3
Original paper sizes for transmission
11" × 17" (A3) to 5-1/2" × 8-1/2" (A5) (Paper with a max. length of
1,000 mm* can be transmitted (one-sided and B/W only).)
Registered paper size
11" × 17" (A3) to 5-1/2" × 8-1/2" (A5)
Transmission time
Approx. 2 seconds *1 (8-1/2" × 11" (A4) Sharp standard paper, normal
characters, Super G3 (JBIG))
Approx. 6 seconds (G3 ECM)
Memory
1 GB
Notes
Touch dial memory Max. of 2,000 entries (Including group dialing for fax,
scanner, and Internet fax)
Entries per group Max. of 500 entries
Mass transmissions Max. of 500 recipients
*1 Complies with the 33.6 kbps transmission method for Super G3 facsimiles standardized by the International
Telecommunications Union (ITU-T). This is the speed for when sending an 8-1/2" × 11" (A4) size piece of paper
of around 700 characters at standard image quality (8 × 3.85 chars/mm) in Hi-speed mode (33.6 kbps). This is
the transmission speed for image information only and does not include time for transmission control. The actual
time needed for a transmission depends on the content of the text, type of receiving fax machine, and telephone
line conditions.
Punch module (for saddle finisher)
Name
Punch module (MX-PNX5B)
Paper size for punch module
11" × 17" (A3) to 7-1/4" × 10-1/2"R (A4)
Holes
3 holes
Required power supply
Supplied from saddle finisher
Dimensions
4-27/32" (W) × 24-5/32" (D) × 9-59/64" (H)
(122 mm (W) × 604 mm (D) × 248 mm (H))
Weight
Approx. 7.7 lbs. (3.5 kg)
To Next Page
Loading...
