Sharp MX-3140 User Manual

C
B
MX-6240N/7040N
+ MX-RB12
Paper Pass Unit
(required for Configurations
B and C)
A
MX-6240N/7040N
MX-FN20
Saddle Stitch
Finisher 4K
(50-sheet staple)
MX-FN22
Saddle Stitch
Finisher 4K
(100-sheet staple)
MX-FN21
Finisher 4K
(100-sheet staple)
MX-FD10*
Folding Unit
MX-RB13*
Relay Unit
MX-CF11
Inserter
MX-RB15
Curl Correction Unit
MX-FN19
Finisher 4K
(50-sheet staple)
MX-PN12B
Punch Unit
MX-TU14
Exit Tray Cabinet
and/or
andand/ororandor
or
B
Configuration B
These configurations require the MX-RB12 and
a finisher, but do not require the MX-PN12B.
The MX-FN19 cannot be used with the MX-FN20.
These items cannot be combined with items from
other finishing configurations.
A
Configuration A
The MX-TU14 must be installed if no finishing
options are selected. This item cannot be combined
with items from other finishing configurations.
C
Configuration C
These configurations require the MX-RB12, MX-RB15 and a finisher.
The MX-RB13 cannot be used with the MX-FD10. The MX-FN21
cannot be used with the MX-FN22. These items cannot be
combined with items from other finishing configurations.
MX-TM10
Trimming Unit
MX-PN13B
Punch Unit
MX-RB12
mX-6240n/7040n configuration chart
Step 2: chooSe finiShing configuration
©2012SharpElectronicsCorporation.Allrightsreserved.
*A Relay Unit or Folding Unit is required to connect a Finisher and Inserter directly.
25

Sharp MX-3140 Specifications

General

Print Technology	Laser
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Speed	31 ppm
Original Size	A3
Connectivity	USB, Ethernet
Category	Multifunction Printer