Sharp MX-3140 User Manual

Note: In addition to the above dimensions, allow three feet of space on all sides for consumable replenishment,
paper jam removal, and maintenance and service procedures. Images may not be to scale.
MX-MF11
MX-RB14
MX-LC13 MX-LC13
MX-FN22
MX-FD10
MX-ST10
MX-CF11
MX-RB15
AB CD EFGH J
IK
L
MX-RB12
M
Height from platen glass
with document feeder open
A 4-3/4"
B 30-1/4"
C
13-1/4"
D, E
36"
F
6-1/2"
G
8-3/8"
H
34-3/8"
I
18"
J, K
35-1/4"
L
240-1/4"
M
23"
SPACE REQUIREMENTS AND PLANNING GUIDE
MX-6500N/7500N
Installing Dealer
Read this document in its entirety before planning your configuration.
Plan ahead and make sure your installation is a great success! Remember to
check the latest information on these products and make sure that the following
items are available prior to installation.
• Verifydedicatedpowersourceandcheckforstability.TheMX-6500N/7500N
DocumentSystemsrequirea208-240VAC,60Hz,20Amp
power source.
The MX-6500N/7500N main unit requires one 208-240 VAC,
20 Amp power source plug
The MX-BM50, MX-FN21, MX-FN22, MX-LC13, and MX-ST10
options each require separate 120 VAC, 15 Amp power source plugs.
• Conrmthatyouhavethelatestrmwareavailablefrom
www.sharp-pcservice.comtoupgradeyourMX-6500N/7500N
Document Systems.
•Someaccessoriesrequireaproductkeyforoperation.Youshouldobtainthe
accessoryApplicationCodeandmachine’sserialnumbertoregistertheproduct
key online prior to arrival at the customer location.
•ChecktoseeifMySharp™onlinetrainingisset
upfortheend-user.
•Verifythatthecustomerhasenoughsupplieson-handtocomplete
alargerushjob.After-hoursprintingand/orholidayworkmaytake
placefollowinganinstallation.SeeSupplies&Accessoriesliston
the following page.
*
Illustrations shown are for measurement purposes only and may not
be to scale. For configurations see subsequent pages.
Design and specifications are subject to change without notice. All product
dimensions listed are approximate. Sharp, Sharp OSA, My Sharp and all related
trademarks are trademarks or registered trademarks of Sharp Corporation and/or
its affiliated companies. PCL is a registered trademark of HP Company. Adobe and
PostScript are registered trademarks of Adobe Systems Inc. All other trademarks
are the property of their respective owners.
31
1
/
8
"
48
7
/
8
"
25
7
/
8
"
14
3
/
4
"
8
3
/
8
"
MX-FN21 MX-RB15
MX-LC12
MX-LCX3N
64
1
/
2
"
48
7
/
8
"2
6
3
/
8
"
MX-SL10N
MX-MF10
MX-GBCX2
GBC Plockmatic
MX-FD50
MX-XB50
MX-TM50 MX-BM50 MX-CF50
Exit Tray
included
with
MX-BM50
87
1
/
4
"
78"
23
3
/
4
" 35
1
/
2
"
39"
3"
14" 14"16
3
/
4
"
Width Measurements
Depth Measurements (overhead view).*
Base Unit Measurements Shown with MX-FN21, MX-RB13, MX-MF10, MX-LC12, and MX-LCX3N.*
Measurements for GBC SmartPunch™ Pro and Plockmatic Booklet Maker System.*
© 2013SharpElectronicsCorporation.Allrightsreserved.10/13
27

Sharp MX-3140 Specifications

General

Print Technology	Laser
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Speed	31 ppm
Original Size	A3
Connectivity	USB, Ethernet
Category	Multifunction Printer