Sharp MX-4070N User Manual

5-51
SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE
SPECIFYING THE ORIGINAL SCAN SIZE USING
NUMERIC VALUES
When scanning a non-standard size original such as a card or postcard, specify the original size using numeric values
after placing the original.
The width can be from 25 mm to 432 mm (1" to 17"), and the height can be from 25 mm to 297 mm (1" to 11-5/8").
When the scan size is specified by numeric values, the send size cannot be specified.
1
Tap the [Detail] key to change to normal mode.
► Changing mode from each mode (page 5-10)
2
Tap the [Original] key.
3
After tapping the "Scan Size" key, tap the [Direct Entry] key.
4
Specify the original size.
• Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
• It is convenient to use to finely adjust the entered size.
5
Tap the [OK] key.
After the settings are completed, tap twice.
On the base screen, check that the specified size is displayed on the [Original] key.
To cancel the specified size settings:
Tap the [Auto] key.
Preview
Start
Others
Address
Address Book
Touch to input Address
Background Adjustment
Colour Mode
Skip Blank Page in Original
Blank Page Skip
Scan Thin Paper Original
Slow Scan Mode
Adjust Outline of Image
Sharpness
Scan Size
Auto A4
Direct EntryInchAB Custom Size
Enter
( 25~297 )
mm
( 25~432 )
mm
297
420X
Y
CA

Sharp MX-4070N Specifications

General

Category	All in One Printer
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Duplex Printing	Yes
Monthly Duty Cycle	150, 000 pages
Print Speed	40 ppm
Scan Speed	80 images per minute
Paper Size	Up to 12" x 18"
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac
Paper Capacity	650 sheets (standard), up to 6, 300 sheets (maximum)
Touchscreen Display	10.1" (diagonal) color LCD touchscreen