MX-5111N IC card reader 32 – 3
Holder type C
RDR-6081AKU, RDR-7582AKU
Holder type C
TWN3
4) Attach the IC card reader holder to the operation panel of the
machine.
5) Bind up the cables of the card reader.
* The length and the winging method differ depending on the
kind of the IC card reader.
Holder type B
Y591-EHID-201 v01
Pass the binding band through the hole before winding.
Hang the cable on the four hooks and wind so that there is
no slack.
* If there is some slack, the cable may be pinched.
To Next Page
Loading...
