MX-5111N IC card reader 32 – 4
Fold and put the rest of the cable under the bundle.
Fix the cable at the USB connector socket section in the
USB mini harness side.
* Fix so that the USB connection position is at the center of
the card reader holder.
Holder type C
RDR-6081AKU, RDR-7582AKU
Hang the cable on the two hooks and wind it so that there is
no slack.
* If there is some slack, the cable may be pinched.
Fold and put the rest of the cable under the bundle.
Bind the root section of the USB connector in the card
reader side and the USB connector socket section in the
USB mini harness side with the binding bands.
* Fix so that the USB connection position is at the center of
the card reader holder.
Holder type C
TWN3
Hang the cable on the two hooks and wind it so that there is
no slack.
* If there is some slack, the cable may be pinched.
Fold and put the rest of the cable under the bundle.
Bind the root section of the USB connector in the card
reader side and the USB connector socket section in the
USB mini harness side with the binding bands.
* Fix so that the USB connection position is at the center of
the card reader holder.
: '11/Jul/25
To Next Page
Loading...
