MX-5111N MX-PNX1A/B/C/D (PUNCH MODULE) 10 – 3
10) Remove the dust box.
11) Fix the punch cover and the band together with one screw.
12) Insert the dust box.
13) Install the front cabinet upper part using the two screws
removed in step 5).
14) Insert the finisher slide stopper between the slide rail and the
accuride, and fix it with the coin screw.
15) Slide the inner finisher to the original position, and close the
front cover.
B. Punch position label attachment
1) Attach the punch position label (Packed items) to the position
indicated in the figure.
For scanner
To Next Page
Loading...
