7-46
SYSTEM SETTINGS►SETTING MODE LIST
Image Quality Adjustment
U: General user; A: System administrator/Administrator
* 1 This setting is configured in setting mode on the machine.
* 2 MX-5050N/MX-5070N/MX-6050N/MX-6070N only.
* 3 This setting is configured in setting mode on the web page.
Setup Items Factory default setting U A
l Image Quality Adjustment (page 7-173)
Collective Adjustment No Yes
Registration Adjustment*
1
– No Yes
Fusing Cleaning Mode*
1
– No Yes
MC Cleaning Mode*
1,
*
2
– No Yes
Black Letter/Black Line Width Adjustment 0 No Yes
Black Streak Reduction Disabled No Yes
Display warning message for black streaks detection. Disabled No Yes
Copy Image Quality No Yes
Quick Image Quality Adjustment 2 No Yes
Colour Balance (Colour) All 0 No Yes
Colour Balance (Black & White) All 0 No Yes
Color Copy Black Component Amount Adjustment All 0 No Yes
Density Adjustment when [Auto] is selected for Exposure No Yes
• Colour Document Glass, Document
Feeder: 5 (Normal)
No Yes
•B/W Document Glass, Document
Feeder: 5 (Normal)
No Yes
Sharpness 2 No Yes
Image Quality Priority No Yes
•Auto 0 No Yes
• Text/Prtd.Photo 0 No Yes
Print Image Quality No Yes
Quick Image Quality Adjustment No Yes
• Colour 2 No Yes
•B/W 2 No Yes
Colour Balance (Colour) All 0 No Yes
Colour Balance (Black & White) All 0 No Yes
Exposure Adjustment No Yes
• Colour 3 (Normal) No Yes
•B/W 3 (Normal) No Yes
Colour Line Width Adjustment 5 No Yes
Scan Image Quality No Yes
RGB Adjust All 0 No Yes
Sharpness 3 (Normal) No Yes
Contrast 3 (Normal) No Yes
Colour Profile Settings*
3
– No Yes
Common Functions*
1
– No Yes
Auto Colour Calibration (for Copy) – No Yes
Auto Colour Calibration (for Print) – No Yes
Copy Calibration by Screen – No Yes
Printer Calibration by Screen – No Yes
Density Smoothing Adjustment Middle No Yes
Remove Toner Cartridge*
1
– No Yes
To Next Page
Loading...
