7-178
SYSTEM SETTINGS►SETTING MODE FOR FAX
The following lists the Setting mode for fax and factory default settings.
System Settings
U: General user; A: System administrator/Administrator
SETTING MODE FOR FAX
Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Setup Items Factory default setting U A
n System Settings
l Image Send Settings (page 7-180) No Yes
Fax Settings No Yes
Default Settings No Yes
• Resolution Setting No Yes
- Apply the Resolution Set when Stored Disabled No Yes
+ (No item) Standard No Yes
• Dial Mode Setting
*1
Tone No Yes
• Auto Wake Up Print Enabled No Yes
• Pause Time Setting 2 seconds No Yes
• Fax Dest. Confirmation Mode Disabled No Yes
• Speaker Settings No Yes
- Speaker Volume: 5 No Yes
- Ringer Volume Volume: 2 No Yes
- Line Monitor Volume: No Sound No Yes
- Fax Receive Complete Signal Volume: 2; Tone Pattern: 3
Transmission Complete Sound
Time Setting: 3 sec.
No Yes
- Fax Send Complete Signal Volume: 2; Tone Pattern: 3
Transmission Complete Sound
Time Setting: 3 sec.
No Yes
- Fax Communication Error Signal Volume: 2; Tone Pattern: 3
Transmission Complete Sound
Time Setting: Every 0.3 seconds
No Yes
• Remote Reception Number Setting 5 No Yes
• Original Print on Transaction Report Print Out Error Report Only No Yes
• Transaction Report Print Select Setting No Yes
- Single Sending Print Out Error Report Only No Yes
- Broadcasting Print Out All Report No Yes
- Receiving No Printed Report No Yes
To Next Page
Loading...
