Sharp MX-5050N

7-49
SYSTEM SETTINGS►STATUS
Total Count
This function shows the page count in each mode.
Device Status
This screen shows the device status.
Supply Status
Displays the current status of supplies.
If staples are installed, their status is displayed.
Paper Input Tray Status Displays the current status of the paper trays installed in the machine.
[Reboot the MFP] key
Displays the restart screen.
(Administrator rights are required.)
[Enter the Power Save Mode] key
Displays the power save mode screen.
(Administrator rights are required.)
• Pages printed directly from the machine such as list prints are included in the "Other Prints" count.
• The items displayed (or printed) will vary depending on the machine specifications and peripheral devices installed.
•
Before printing the number of pages used, select "Settings (administrator)" → [Status] → [Data List] → [List for
Administrator].
• In All Sending Address List, the following items are handled by 2-sided printing on an item basis.
• Individual List
•Group List
Item Description
[Update] button Updates the information displayed.
Paper Input Tray Status Displays the current status of the paper trays installed in the machine.
Output Tray Status Displays the current status of the output tray installed in the machine.
Supply Status
Displays the current status of supplies.
If staples are installed, their status is displayed.
Device Configuration Displays the information of options installed in the machine.
HDD Status Displays the usage status of the hard disk drive.
Item Description