5
5
35
This chapter explains how to use the printer functions.
The procedure for loading paper is the same as for loading copy paper. See
"LOADING PAPER" (p.9).
BASIC PRINTING
The following example explains how to print a document from WordPad.
Before printing, make sure that the correct size of paper for your document has been
loaded in the machine.
1
Start WordPad and open the document that you wish to print.
2
Select "Print" from the application's "File"
menu.
If you are using Windows 7, click the button.
• If copying is being performed when printing is started, copying will
continue. After copying is complete, printing will be executed when the
clear key is pressed twice or approximately 60 seconds (auto clear
time)* elapse.
* The auto clear time varies with a user program setting. See "USER
PROGRAMS" (p.63).
• Preheat mode and auto power shut-off mode will be cancelled when
printing is started.
• If the paper size specified from the software application is larger than
the paper size in the printer, part of the image that is not transferred to
the paper may remain on the surface of the drum. In this case, the
rear side of the paper may become dirty. If this occurs, change to the
correct size paper and print two or three pages to clean the image.
The menu used to execute printing
may vary depending on the software
application.
PRINTER FUNCTIONS
To Next Page
Loading...
Need help?
General
