Sharp MX-B200 User Manual

7
7
61
This chapter describes the special functions of this unit. Use these functions as
needed.
DESCRIPTION OF SPECIAL FUNCTIONS
Toner save mode
Reduces toner consumption by approximately 10%.
Power save modes
The unit has two power save modes of operation: preheat mode and auto power
shut-off mode.
Preheat mode
When the unit enters the preheat mode, the power save ( ) indicator will light up
and other indicators will remain on or off as before. In this condition, the fuser in
the unit is maintained at a lower heat level, thereby saving power. To copy from
the preheat mode, make desired copier selections and press the start ( ) key
using the normal copying procedure.
Auto power shut-off mode
When the unit enters the auto power shut-off mode, the power save ( ) indicator
will light up and other indicators will go out. The auto power shut-off mode saves
more power than the preheat mode but requires a longer time before starting
copying. To copy from the auto power shut-off mode, press the start ( ) key.
Then make desired copier selections and press the start ( ) key using the
normal copying procedure.
Auto clear
The unit returns to the initial settings a preset amount of time after the end of job.
This preset amount of time (auto clear time) can be changed.
Resolution of AUTO & MANUAL mode
You can set the copy resolution used for AUTO and MANUAL ( ) exposure
mode.
SPECIAL FUNCTIONS

Sharp MX-B200 Specifications

General

Print Technology	Laser
Print Speed	20 ppm
Maximum Print Resolution	600 x 600 dpi
Copy Speed	20 cpm
Scanner Type	Flatbed
Functions	Print, Copy, Scan
Paper Capacity	250 sheets
Interface	USB 2.0
Dimensions	518 x 445 x 298 mm
Paper Size	A4, A5
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows
Memory	64 MB (Standard)