18
PLACING ORIGINALS
The automatic document feeder can be used to automatically scan many originals at
once. This saves you the trouble of manually feeding each original.
For originals that cannot be scanned using the automatic document feeder, such as a
book or a document with notes attached, use the document glass.
Using the automatic document feeder
When using the automatic document feeder, place the originals in the document feeder
tray.
Make sure an original has not been placed on the document glass.
Adjust the original guides
to the width of the originals.
Place the originals face up with the edges
aligned evenly.
The indicator line indicates approximately
how many originals can be placed. The placed
originals must not be higher than this line.
When using the MX-B402
Set the original in the upper
tray.
When using the MX-B402SC
Adjust the original guides
to the width of the originals.
Place the originals face up with the edges
aligned evenly.
The indicator line indicates approximately
how many originals can be placed. The placed
originals must not be higher than this line.
Set the original in the lower
tray.
mxb402_us_sta.fm Page 18 Monday, June 14, 2010 3:46 PM
To Next Page
Loading...
