Sharp MX-B402

30
SETUP IN A WINDOWS ENVIRONMENT
5
Read the message in the "Welcome" window and then
click the [Next] button.
6
The software selection screen appears.
Before installing the software, be sure to click the [Display Readme] button and
view the detailed information on the software.
* The above screen appears when using the "Disc 1" CD-ROM.
For the steps that follow, see the appropriate page below for the software that
you are installing.
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
• WHEN THE MACHINE IS CONNECTED TO A NETWORK
*
- Standard installation: page 32
- Installation by specifying the machine's address: page 1-85 in the Operation
Guide
- Printing using the IPP function and the SSL function: page 1-88 in the
Operation Guide
• WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE: page 1-90
in the Operation Guide
• USING THE MACHINE AS A SHARED PRINTER: page 1-95n the Operation
Guide
INSTALLING THE PRINTER STATUS MONITOR: page 1-100 in the Operation
Guide
INSTALLING THE SCANNER DRIVER: page 1-101 in the Operation Guide
*
If the machine is being used on an IPv6 network, see "Installation by specifying the
machine's address" (page 1-85 in the Operation Guide).
mxb402_us_sta.fm Page 30 Monday, June 14, 2010 3:46 PM