33
SETUP IN A WINDOWS ENVIRONMENT
When [Custom installation] is selected, you can change any of the items below.
When [Standard installation] is selected, the installation will take place as
indicated below.
• Machine connection method: LPR Direct Print (Auto Search)
• Set as default printer:Yes (excluding the PC-Fax driver)
• Printer driver name: Cannot be changed
• PCL printer display fonts: Installed
If you selected [Custom installation], select [LPR Direct Print (Auto Search)]
and click the [Next] button.
If you selected other than [LPR Direct Print (Auto Search)], see the following
pages in the Operation Guide:
• LPR Direct Print (Specify Address): page 1-85
• IPP: page 1-88 • Shared printer: page 1-95
• Connected to this computer: page 1-90
3
Printers connected to the network are detected. Select
the machine and click the [Next] button.
• If the machine is not found, make sure that the machine is powered on and
that the machine is connected to the network, and then click the [Re-search]
button.
• You can also click the [Specify condition] button and search for the machine
by entering the machine's name (host name) or IP address.
☞
Checking the IP address of the machine (page 28)
mxb402_us_sta.fm Page 33 Monday, June 14, 2010 3:46 PM
To Next Page
Loading...
