Sharp MX-C301W

SHARP
WIRELESS LAN SETUP
23
5. Under the connection type menu, select the preferred Wireless connection type (Wired, Wireless
(Infrastructure Mode) or Wired+Wireless AP (Access Point).
6. When prompted, power cycle the MFP device:-
7. Reopen the Network menu (Special Function - System Settings).
Note: Administrator login will be required.
8. Enter the required Wireless Settings for the specified Wireless Connection Type (Access Point
Mode or Infrastructure Mode) selected in Step 5:-
Note:
Detailed information regarding all Wireless Settings can be found on the following page:-
Network_______________________
Connection Type
Wired Settings
Wireless (Infrastructure)
Wireless (Access Point)
Network_______________________
Connection Type
Wired Settings
Wireless (Infrastructure)
Wireless (Access Point)
Wireless (Access Point)___________
Security Settings
Device IP Address Settings
Channel Settings
Setting of SSID
Please power the
switch off and on
again, to allow the
new setup to take
effect.