To Next PageTo Next PageWhat to do if Sharp MX-C400P driver is not installed correctly by plug and play (USB connection in Windows)?
In Windows 2000/XP/Server 2003/Vista/7, if the Sharp printer was connected via USB before installing the driver, check 'Device Manager' for any unsuccessful installation information. If the printer's model name appears in 'Other devices', delete it, restart your computer, and reinstall the printer driver.
What to do if plug and play screen does not appear for Sharp MX-C400P (USB connection in Windows)?
If the plug and play screen doesn't appear when connecting your Sharp printer via USB in Windows: * Ensure the printer is powered 'ON' before connecting the USB cable. If it's off, switch on the main power switch and then the [POWER] key. * Check in your computer's Device Manager to see if the USB interface is enabled. Look for 'Universal Serial Bus controllers'. If a yellow exclamation point appears or the items do not appear, consult your computer manual or manufacturer to enable USB, then reinstall the printer driver.
General| Print Speed (Black) | 40 ppm |
|---|---|
| Print Speed (Color) | 40 ppm |
| Duplex Printing | Yes |
| Type | Laser |
| Connectivity | Ethernet |
| Supported Media Sizes | A4, A5, Letter, Legal |
| Category | Color Printer |
