Sharp MX-C400P

12
SPECIFICATIONS
Machine specifications
*1 When the machine is used as a PostScript printer.
*2 When the XPS expansion kit is installed.
*3 Barcode font kit is required.
*4 Supported operating systems are Windows 2000 / Server 2003 / XP / Vista /
Server 2008 / 7.
*5 To install the XPS expansion kit, an expansion memory board is required.
Name
Digital Full Color Printer
MX-C400P
Type
Desktop
Display
4.3 inch color LCD
Photoconductive type
OPC drum
Printing method
Electrophotographic system (laser)
Developer system
Dry-type two-component magnetic brush development
Fusing system
Heat rollers
Printing resolution
600 x 600 dpi / 1200 x 1200 dpi
Printing gradation
Equivalent to 256 levels
Printer driver type
PCL5c, PCL6, PostScript 3 compatible*
1
, XPS*
2
Supported protocols
TCP/IP, IPX/SPX, NetBEUI, EtherTalk
Supported client PC
operating systems
See "VERIFYING SYSTEM REQUIREMENTS" in the
Software Setup Guide.
Fonts
PCL5c,
PCL6
80 European fonts, 28 barcode fonts*
3
,
1 bitmap font
PostScript 3
compatible*
1
136 European fonts
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)*
4
Memory
Standard
system
memory
1GB
Expansion
memory
1GB*
5
Print area
Entire page excluding margin of 11/64" (4.2 mm) at each
edge. The actual print area may vary depending on the
printer driver and the software application.
mxc400p_us_saf.book 12 ページ ２００９年１０月５日 月曜日 午後１時５３分