Sharp MX-C400P Safety Guide

4
CAUTIONS
WARNING
Do not insert or remove the power plug with wet hands.
This may cause electrical shock.
Do not use a flammable spray to clean the machine.
If gas from the spray comes in contact with hot electrical components
or the fusing unit inside the machine, fire or electrical shock may result.
Do not make any modifications to this machine.
Doing so may result in personal injury or damage to the machine.
If a thunder storm begins, switch off the main power and remove
the power plug from the outlet to prevent electrical shock and
fire due to lightning.
If you notice smoke, a strange odor, or other abnormality, do
not use the machine.
If used in this condition, fire or electrical shock may result.
Immediately switch off the main power and remove the power plug
from the power outlet. Contact your dealer or nearest SHARP Service Department.
If a piece of metal or water enters the machine, switch off the
main power and remove the power plug from the power outlet.
Contact your dealer or nearest SHARP Service Department. Using
the machine in this condition may result in electrical shock or fire.
mxc400p_us_saf.book 4 ページ ２００９年１０月５日 月曜日 午後１時５３分

Sharp MX-C400P Specifications

General

Brand	Sharp
Model	MX-C400P
Category	Printer
Language	English