Sharp MX-C507P - Page 264

5028
650 errors
650 error messages
653 errors
653 error messages
Diagnostics and troubleshooting
230
Error code
Description
Action
653.80
The motor (ISO) did not turn on.
See “Isolation unit service check” on
page 219 .
653.81
The motor (ISO) did not turn off.
653.82
The motor (ISO) speed did not ramp up to the
required level.
653.83
The motor (ISO) stalled.
653.84
The motor (ISO) ran too slow.
653.85
The motor (ISO) ran too fast.
653.86
The motor (ISO) did not run at the correct timing.
Error code
Description
Action
650.80
The motor (duplex/MPF) did not turn on.
See “Motor (duplex/MPF) service check” on
page 216 .
650.81
The motor (duplex/MPF) did not turn off.
650.82
The motor (duplex/MPF) speed did not ramp up to
the required level.
650.83
The motor (duplex/MPF) stalled.
650.84
The motor (duplex/MPF) ran too slow.
650.85
The motor (duplex/MPF) ran too fast.
650.86
The motor (duplex/MPF) did not run at the correct
timing.