Sharp MX-C507P - Page 263

5028
621 errors
621 error messages
647 errors
647 error messages
649 errors
649 error messages
Diagnostics and troubleshooting
229
Error code
Description
Action
649.80
The motor (redrive) did not turn on.
See “Motor (output) service check” on
page 214 .
649.81
The motor (redrive) did not turn off.
649.82
The motor (redrive) speed did not ramp up to the
required level.
649.83
The motor (redrive) stalled.
649.84
The motor (redrive) ran too slow.
649.85
The motor (redrive) ran too fast.
649.86
The motor (redrive) did not run at the correct
timing.
Error code
Description
Action
647.80
The motor (deskew) did not turn on.
See “Motor (deskew) service check” on
page 213 .
647.81
The motor (deskew) did not turn off.
647.82
The motor (deskew) speed did not ramp up to the
required level.
647.83
The motor (deskew) stalled.
647.84
The motor (deskew) ran too slow.
647.85
The motor (deskew) ran too fast.
647.86
The motor (deskew) did not run at the correct
timing.
Error code
Description
Action
621.01
The printer registers a 621.01 fuser error which
is due to the temperature not being reached
during the printing process.
See “Fuser service check” on page 203 .