3 Front 381 mm (15 in.)
4 Left side 457 mm (18 in.)
5 Rear 203 mm (8 in.)
Printer configurations
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, contact the place where you purchased the printer.
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
You can configure your printer by adding an optional 2200‑sheet tray or a combination of up to three optional
550‑sheet trays or envelope trays.
1 Control panel
2 Staple finisher
3 Standard bin
4 Standard 550‑sheet tray
5 Optional 550‑sheet trays or envelope trays
6 Optional 2200‑sheet tray
7 Multipurpose feeder
Learning about the printer 9
To Next Page
Loading...
Need help?
General
