Sharp MX-FN10 - Saddle Finisher Cabinet Disassembly

MX-FN10 DISASSEMBLY AND ASSEMBLY 6 – 2
(4) Front cabinet
1) Remove the front lower cover.
2) Open the front door, and remove the front cabinet.
(5) Rear cabinet upper
1) Remove the rear cabinet upper.
(6) Rear cabinet lower
1) Remove the front lower cover. (See (4).)
2) Remove the rear cabinet upper. (See (5).)
3) Remove the foot cover.
4) Remove the rear cabinet lower.
(7) Upper door
1) Remove the front cabinet. (See (4).)
2) Remove the rear cabinet upper. (See (5).)
3) Remove the upper door.
(8) Right cabinet
1) Remove the front cabinet. (See (4).)
2) Remove the rear cabinet. (See (5).)
3) Remove the right cabinet.