Sharp MX-FN10 User Manual

SERVICE MANUAL
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
[1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[2] SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
[3] UNPACKING AND INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . 3-1
* For how to unpacking and installation, refer to the installation manual.
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . . . . . 4-1
[5] OPERATIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
[6] DISASSEMBLY AND ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
[7] MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
[8] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[9] SELF DIAG MESSAGE AND TROUBLE CODE. . . . . . . . . . . . . . . 9-1
[10] ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
TopPage
CODE: 00ZMXFN10/S1E
DIGITAL FULL COLOR
MULTIFUNCTIONAL SYSTEM OPTION
SADDLE STITCH FINISHER
PUNCH MODULE
PAPER PASS UNIT
MX-FN10
MX-PNX5 A/B/C/D
MX-RBX3
MODEL
CONTENTS

Sharp MX-FN10 Specifications

General

Product Type	Finisher
Functions	Stapling
Stapling Capacity	50 sheets
Output Capacity	500 sheets
Compatibility	Sharp Multifunction Printers
Compatible Models	MX-4070

Summary

Product Outline and Configuration

Product Outline Description

Details the unit's purpose and installation with copiers/fax machines.

Product Configuration

Describes the required and incompatible units for installation.

Specifications for Finisher, Punch, and Pass Units

MX-FN10 Basic Specifications

Lists basic specifications for the MX-FN10 finisher.

Finishing Section Specifications

Details paper capacity, sizes, and stapling capabilities.

Saddle Stitch Section Specifications

Details saddle stitch stapling type, location, and paper compatibility.

MX-PNX5 A/B/C/D Punch Specifications

Details punch unit type, speed, paper compatibility, and hole patterns.

MX-RBX3 Paper Pass Unit Specifications

Details paper pass unit type, speed, paper compatibility, and dimensions.

External Views and Internal Structures

Part Names and Functions Overview

Identifies external parts and internal components of the finisher section.

Punch Section Components

Lists components of the optional punch section.

Interface Transport Section (MX-RBX3)

Shows internal parts of the MX-RBX3 interface transport section.

Finisher and Saddle Section Sensors and Switches

Details sensors and switches within the finisher and saddle section.

Finisher and Saddle Section Sensors and Switches (Continued)

Lists more sensors and switches in the finisher and saddle section.

Motor and PWB Components

Lists motors and PWB components in the finisher section.

Punch Section Sensors

Details sensors within the optional punch section.

Punch Section Motors and PWB

Lists motors and PWB in the punch section.

Interface Transport Section Sensors

Details sensors in the MX-RBX3 interface transport section.

Operational Description of Modes and Processes

Straight Paper Exit Mode Operation

Explains the paper path and motor operations in this mode.

Non Staple Mode Operation

Describes the paper path and motor operations in non-staple mode.

Rear Staple Mode Operation

Explains the paper path and motor operations for rear stapling.

2-Position Staple Mode Operation

Details paper path and motor operations for 2-position stapling.

Front Staple Mode Operation

Explains paper path and motor operations for front stapling.

Front Staple Mode Operation (Continued)

Saddle Motor Operation

Saddle Motor Operation (Continued)

Punch Process Description

Punch Process Description (Continued)

Disassembly and Assembly Procedures

Saddle Finisher Disassembly

Saddle Finisher Cabinet Disassembly

Saddle Finisher Side Guide Disassembly

Transport Section Disassembly

Transport Section Disassembly (Continued)

Transport Section Motor and Gearbox Disassembly

PWB Section Disassembly

PWB Section Fixing Parts Disassembly

Paper Transport Section (MX-RBX3) Disassembly

Paper Transport Section Components Disassembly

Paper Transport Section Roller Disassembly

Paper Transport Section Exit and Reverse Tray Disassembly

Punch Section Drive Section Disassembly

Punch Section PWB and Sensor Disassembly

Punch Section Registration Sensor Disassembly

Maintenance Procedures and System Table

Maintenance System Table

Adjustments and Settings

Finisher, Saddle, and Punch Unit Adjustments

Punch Unit Destination Setting

Punch Unit Sensor Adjustment Procedures

Self Diagnosis and Troubleshooting Guide

Interface Transport Unit Issues

Punch Unit Issues

Punch Unit Issues (Continued)

Transport Section Issues (Excluding Saddle)

Transport Section Issues (Excluding Saddle) (Continued)

Process Tray Issues

Load Tray Issues

Staple Unit Issues

Saddle Transport Load Section Issues

Saddle Staple Unit Issues

Saddle Folding Section Issues

Electrical Section Diagrams

MX-FN10 Block Diagram

MX-RBX3 Block Diagram

MX-PNX5 A/B/C/D Block Diagram

MX-FN10 Wiring Diagram (1/5)

MX-FN10 Wiring Diagram (2/5)

MX-FN10 Wiring Diagram (3/5)

MX-FN10 Wiring Diagram (4/5)

MX-FN10 Wiring Diagram (5/5)

MX-RBX3 Wiring Diagram

MX-PNX5 A/B/C/D Wiring Diagram