Sharp MX-FN10 - MX-PNX5 A;B;C;D Punch Specifications

MX-FN10 SPECIFICATIONS 2 – 2
2. MX-PNX5 A/B/C/D
*1: Auto switching: 2 holes/3 holes
Kind of hole punch
Type Punch unit for saddle finisher
Punch type 2 holes / 3 holes / 4 holes / 4 holes (wide)
A punch unit that provides all of these 4 types can be installed.
Transport speed 26, 31, 35, 45, sheets/min.
Transport reference Center reference
Punch dust full detection Provided
Paper exit direction Face down
Paper weight Plain paper: 60 to 105g/m
2
(16 to 28 lbs)
Thin paper: 55 to 59g/m
2
(15 to 16 lbs)
Heavy paper: 106 to 256g/m
2
(28 to 68 lbs)
Puchable paper size 2 holes
(MX-PNX5A)
A3, B4, A4, A4R, B5, B5R, 11" x 17", 8.5" x 14", 8.5" x 13.5", 8.5" x 13.4", 8.5" x 13", 8.5" x 11",
8.5" x 11"R, 8K, 16K, 16KR
3 holes *1
(MX-PNX5B)
3 holes: A3, A4, 11" x 17", 8.5" x 11"
2 holes: 8.5" x 14", 8.5" x 13.5", 8.5" x 13.4", 8.5" x 13", 8.5" x 11"R, 7.25" x 10.5"R
4 holes
(MX-PNX5C)
A3, A4
4 holes (wide)
(MX-PNX5D)
A3, B4, A4, A4R, B5, B5R, 11" x 17", 8.5" x 14", 8.5" x 13.5", 8.5" x 13.4", 8.5" x 13", 8.5" x 11",
8.5" x 11"R
Power source Supplied from the finisher
External dimensions (W x D x H) 120.2 x 600.4 x 244.2 (mm), 4-23/32 x 23-5/8 x 9-39/64 (inch)
Weight Approx. 3.5kg (7.7 lbs)
Packaged items Parts for mounting, instructional label for garbage pickup
Kind Hole position
Hole
size
Kind Hole position
Hole
size
2 holes
(MX-PNX5A)
A: 801mm
B: 123mm
6.5mm 4 holes
(MX-PNX5C)
A: 801mm
B: 123mm
6.5mm
2/3 holes
(MX-PNX5B)
2 holes A: 1081mm
B: 123mm
8.0mm 4 holes
(wide)
(MX-PNX5D)
A: 701mm
B: 123mm
C: 211mm
6.5mm
3 holes A: 701mm
B: 123mm
A
B
A
B
A
A
A
B
A
B
C
A
B
A