Sharp MX-FN10 - Maintenance Procedures and System Table; Maintenance System Table

MX-FN10 MAINTENANCE 7 – 1
MX-FN10
Service Manual
[7] MAINTENANCE
1. Maintenance System Table
: Check (Clean, replace, or adjust as necessary.) : Clean : Replace : Adjust ✩: Lubricate : Move position
No. Part name
When
calling
100
K
200
K
300
K
400
K
500
K
600
K
700
K
800
K
900
K
1000
K
1100
K
Remark
1 Transport rollers    
2 Transport paper guides    
3Gears When checking, apply to the necessary
positions. (Specified positions)
4Belts
5 Knurled belt   Replacement reference: Replace at
every 1000K of the finisher paper exit
count value.
6Sensors
7 Discharge brush
8 Stapler unit Replacement reference: Replace the unit at every 200K staple.
9 Stapler unit for saddle Replacement reference: Replace the unit at every 100K staple.
10 Punch unit Replacement reference: Replace the unit at every 1000K.
11 Staple cartridge User replacement for every 5000pcs.
12 Staple cartridge for saddle User replacement for every 2000pcs.
6
6
6
6
66 6666 6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
5
1
11
1
12
1
1
1
7
8
9
7
1
66 6 6 6 6
11110