MX-FN10 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 – 3
C. Finisher and saddle section
(1) Sensor and switch
No. Code Signal Name Type Function/Operation Output
1 PINS FPPD1 Finisher Paper Pass
Detector 1
Photointerrupter Paper detection at the inlet port of
the finisher
When there is paper, TP1
becomes HI level.
2 EMPS FATPD Finisher Paper Alignment
Tray Paper Detector
Photointerrupter Paper detection on the process
tray
When there is paper, TP26
becomes HI level.
3 SFTEMPS FDTPD Finisher Paper Delivery Tray
Paper Detector
Photointerrupter Paper detection on the load tray When there is paper, TP116
becomes LO level.
4 BDINS FPPD2 Finisher Paper Pass
Detector 2
Photointerrupter Paper detection at the inlet port of
the saddle process section
When there is paper, TP11
becomes HI level.
5 BDOUTS FPPD3 Finisher Paper Pass
Detector 3
Photointerrupter Paper detection at the saddle
paper exit section
When there is paper, TP8
becomes HI level.
6 BDEMPS FSPOD Finisher Saddle Paper
Delivery Tray Paper Detector
Photointerrupter Paper detection on the saddle
load tray
When there is paper, TP4
becomes LO level.
7 BDPASS FSATPD Finisher Saddle Paper
Alignment Tray Paper
Detector
Photointerrupter Paper detection in the saddle
process section
When there is paper, TP4
becomes LO level.
8 RUDS FDRHS Finisher Delivery Roller
Homeposition Sensor
Photointerrupter Detection of the upper standby
position of up/down movement of
the bundle exit roller
When the roller is at the upper
standby position, TP12 becomes
LO level.
9 FJOGHPS FPAPHS_F Finisher Paper Alignment
Plate Homeposition Sensor
(Front)
Photointerrupter Detection of the front side
alignment guide home position
When at home position, TP9
becomes LO level.
10 RJOGHPS FPAPHS_R Finisher Paper Alignment
Plate Homeposition Sensor
(Rear)
Photointerrupter Detection of the rear side
alignment guide home position
When at home position, TP10
becomes LO level.
11 LVLS FPLD Finisher Paper Level
Detector
Photointerrupter Detection of paper surface
position on the load tray by the
combination of both sensor
outputs
* Refer to the separate table
outside the column.
12 LVLHPS FPHHD Finisher Paper Hold
Homeposition Sensor
Photointerrupter
13 GRPHPS FGHPS Finisher Gripper Home
Position Sensor
Photointerrupter Gripper arm HP position
detection
When at home position, TP10
becomes LO level.
14 SLDHPS FSSHPS Finisher Stapler Shift Home
Position Sensor
Photointerrupter Detection of the edge stapler unit
home position in the FR direction
When at home position, TP7
becomes HI level.
15 TOPCOVS FCD2 Finisher Cover Detector 2 Photointerrupter Detection of open/close of the
upper JAM release cover
When the cover is closed, TP15
becomes LO level.
To Next Page
Loading...