Sharp MX-FN10 - Punch Section Sensors

To Next Page

To Previous Page

MX-FN10 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 – 6

D. Punch section (Option: MX-PNX5 A/B/C/D)

(1) Sensor

(2) Motor and PWB

No. Code Signal Name Type Function/Operation Output

1 PNCHPOS FPPS Finisher Punch Paper

Position Sensor

Photointerrupter Detects the punch rotating position. When at home position, TP47 on the

control PWB of the finisher becomes

HI level.

2 PNCHHP FPCHPS Finisher Puncher Cam

Home Position Sensor

Photointerrupter Detects the lower limit position on the

3-hole side in the 2/3-hole punch.

When at the lower limit position, TP48

on the control PWB of the finisher

becomes HI level.

3 PNCHCLK FPMRS Finisher Punch Motor

Rotation Sensor

Photointerrupter Controls the punch position and

detects the motor lock.

When at home position, TP49 on the

control PWB of the finisher becomes

HI level.

4 SLDHP FPHPS Finisher Puncher Home

Position Sensor

Photointerrupter Detects the home position of the

punch position horizontal resist

correction mechanism.

When at home position, TP49 on the

control PWB of the finisher becomes

HI level.

