Sharp MX-M310N

154
TO THE ADMINISTRATOR OF
THE MACHINE
(Separate this page from the manual and keep it in a safe place.)
Factory default passwords
When accessing the system settings, the administrator password is required to log in with administrator
rights. The system settings can be configured in the Web pages as well as on the operation panel. To
access the system settings using the Web pages, a password is also required.
Factory default administrator password
Store a new administrator password as soon as the machine is installed.
Once the administrator password has been changed, the new password is required to restore the factory
default password. Take care to remember the new password.
Factory default passwords (Web pages)
There are two factory default accounts: "Administrator" and "User". A person who logs in as an
"Administrator" can configure all settings in the Web pages. In addition, an administrator can restrict
access to other settings by enabling "User" accounts.
The factory default passwords are shown below.
Factory default setting: 00000
Factory default account Factory default password
User user Sharp
Administrator admin Sharp
✂
MX-M310.book 154 ページ ２００９年８月７日 金曜日 午後１時１０分