MX-M316N OPERATIONAL DESCRIPTIONS 11 – 24
B. Transfer operation
The toner image on the photo conductor is transferred to the paper by
applying the positive high voltage to the transfer roller.
C. Cleaning operation
The unnecessary toner on the transfer roller is moved to the photo
conductor by changing the polar character of the transfer roller to the
negative high voltage type. Then, the unnecessary toner is trans-
ported to the waste toner section by the cleaning blade of the photo
conductor.
0HOTOCONDUCTOR/0#DRUM
4RANSFERROLLER
$ISCHARGEPLATE
#LEANINGMODE4RANSFERMODE
#ONSTANTCURRENT
0HOTOCONDUCTOR/0#DRUM
4RANSFERROLLER
$ISCHARGEPLATE
#LEANINGMODE4RANSFERMODE
#ONSTANTCURRENT
To Next Page
Loading...
