Sharp MX-M700U - Paper Feed and Paper Transport Section; Paper Feed Unit; Pickup Roller

MX-M700N DSPF SECTION C – 10
C. Paper feed and paper transport
section
(1) Paper feed unit
1) Remove the cabinet. (See “A-(1)-a. Cabinet”)
2) Disconnect the connector, and remove the paper feed unit.
a. Paper feed roller
b. Pickup roller
1) Pull up the lever and open the upper cover.
2) Remove the roller cover.
3) Remove the pawl, and remove the paper feed roller (A) and
pickup roller (B).
No. Unit No. Parts
Mainte
nance
(1) Paper feed unit a Paper feed roller ✕ {
b Pickup roller ✕ {
c DSPF paper feed clutch
d DSPF document tray upper
limit detector
e DSPF document upper limit
detector
f DSPF cover switch
g DSPF document paper pass
detector 1
(2) Others a Separation roller ✕ {
b DSPF paper feed/paper
transport motor
c DSPF resist roller brake
clutch
d DSPF resist roller clutch
e No.1 resist roller (Drive) ✕ {
f Torque limiter ✕
g DSPF paper transport roller 2
brake clutch
h DSPF paper transport roller 2
clutch
i Transport roller 2 (Drive) ✕ {
j Transport roller 1 (Drive) ✕ {
k DSPF document paper pass
detector 2
(1) (1)-a
(1)-b
(1)-d
(1)-e
(1)-f
(1)-g
(1)-c
(2)-a
(2)-b
(2)-d
(2)-e
(2)-f
(2)-g
(2)-h
(2)-i
(2)-j
(2)-c
(2)-k
AB