Sharp MX-M700U - Page 381

MX-M700N DRIVE SECTION P – 1
MX-M700N
5GTXKEG/CPWCN

[P] DRIVE SECTION
1. Disassembly and assembly
A. Fusing drive section
(1) Fusing drive unit
1) Remove the fusing unit.
(See “(1) Fusing unit” in the “FUSING SECTION”)
2) Remove the fusing motor. (See “(2)-a. Fusing motor”)
3) Disconnect the connector and remove the harnesse clamp.
4) Remove the fusing drive unit.
* Remove the screw which was indicated with the arrow mark.
a. Paper exit motor 1
b. Paper exit motor 2
1) Remove the fusing unit.
(See “(1) Fusing unit” in the “FUSING SECTION”)
2) Remove the fusing drive unit. (See “b-1. Fusing motor”)
3) Disconnect the connector, and remove the fusing drive frame.
4) Remove the paper exit motor 1 (A) and the paper exit motor 2
(B).
(2) Others
a. Fusing motor
1) Remove the rear cabinet and the rear cabinet upper.
No. Unit No. Parts
(1) Fusing drive unit a Paper exit motor 1
b Paper exit motor 2
(2) Others a Fusing motor
(2)-a
(1)-a
(1)-b
(1)
A
B