PERIPHERAL / OPTION CONFIGURATION
MULTI BYPASS TRAY – MX-MFX1
Sim 40-02 Bypass Tray Adjustment [MX-MFX1 only].
FAX OPTION – MX-FX11
Sim 66-02 Fax SW Setting (Destination).
Sim 66-10 Fax Memory Clear (For Extended Memory).
Sim 66-39 Fax Destination Set.
SADDLE FINISHER – MX-FN22 & MX-FN25
Sim 03-10 Saddle Fold/Staple Position Adjustment.
Sim 26-65 Finisher Alarm Mode:
Limit number of Copies in staple mode (ON/OFF).
FOLDING UNIT – MX-FD10
Z Fold Skew Adjustment check.
EXTERNAL KEYBOARD – MX-KB13
Keyboard Language Setting:
System Settings – Default Settings – Keyboard Select - Select English(US).
EXTERNAL ACCOUNTING MODULE – MX-AMX3
Sim 55-03 Auto clear function before Copy job execution:-
SSW 1-5 0 = Disable, 1 = Enable
Sim 55-03 USB Card Reader detection control:-
SSW 6-8 0 = Disable, 1 = Enable
Sim 55-03 Continuous print mode (job queuing for OSA):-
SSW 24-7 0 = Disable, 1 = Enable
MFP DATA BACKUP
Sim 22-06 Data Simulation Print.
Device Clone & Storage Backup
Sim 56-01 Backup EEPROM Data to HDD
To Next Page
Loading...
Need help?
General
