38
SAVE (save)
Registers
the
program as a file.
Format:
SAVE"
[<device
name>
:]
<filename> "
[<,A>]
Note: Only FDn or CMT device name.
Abbreviated form:
SA.
Explanation:
• Registers the program as a file on the floppy disk, etc.
•
If
the device designated
by
the
DEFAULT
statement
is
specified, the <device
name>
can be omitted.
•
If
option
"A"
is
applied, the SAVE
is
as
ASCiI format.
The
file
is
saved
as
a BSD file, so take care not to assign a filename which would be
confused with the data file made by
WOPEN # and PRINT # statements.
• The
file
type created
by
the SAVE command
is
a BTX
or
BSD file.
• The <file
name>
cannot be omitted.
Example:
SAVE
"FD1:PROG"
..... Puts the file name
"PROG"
in the program on the floppy disk (drive number
1)
and registers it. The type of registered file becomes BTX.
To Next Page
Loading...
