Sharp MZ-700 - Definition Statements (DIM, DEF FN, DEF KEY)

55
DEFAULT (default)
Sets device names.
Format:
DEFAULT" <device name>: "
Note: Only FDn, CMT, or RSn device name.
Abbreviated form:
OEF.
Explanation:
• Defines available device name if <device name> is omitted by command
statement.
• The device name reading DISK BASIC is defined in FDl.
• Device names are as follows.
F On :
C MT :
R S{; \:
Examples:
floppy disk (n
= 1 - 4)
cassette tape
RS-232C interface (n = 1 - 2)
DEFAULT "CMT:"
..... Considered to be cassette tape if <device name> is omitted in each command.
DE F AUL T "F 02: "
..... Considered to be floppy disk (drive 2) if (device name) is omitted in each
command.