Sharp MZ-700 - Manual Preface and Overview

• Difference between the CASSETTE TAPE BASIC and
DISK BASIC.
The following commands are extended and supplemented in the difference between
the
CASSETIE TAPE BASIC and DISK BASIC.
Extension Page
Supplement Page
Supplement Page
RUN ....................... 36
DIR ........................ 35
XOR ....................... 65
LOAD ..................... 37 LOCK ..................... 40
N()T ....................... 65
SAVE ...................... 38 UNLOCK ................ 41
OR ......................... 65
DELETE ................. 39 RENAME ................ 42
AND ....................... 65
MERGE .................. 43
CHAIN ................... 44
ROPEN # ................ 46 SWAP ..................... 45
INPUT # ................. 47 XOPEN # ................ 50
WOPEN # ............... 48
KILL # .................... 54
PRINT# ................. 49
DEFAULT ............... 55
INPUT # ( ) ........... 51 EOF# .................... 56
PRINT # ( ) ........... 52 LABEL ................... 57
CLOSE # ................ 53 WAIT ...................... 58
USR ....................... 62 SEARCH ................. 59
INP@ ..................... 63 INIT ........................ 60
OUT@ ................... 64
In addition to the above, there are the following differences:
CASSETIE TAPE BASIC DISK BASIC
If the space key is pressed, the LIST Once the space key is pressed, the LIST
display stops, and if it is not pressed,
display stops, and, if it
is pressed for a
the
LIST display continues.
second time,
the LIST display con-
tinues.
Relative to the data file, the
CASSET- Relative to the data file, the DISK
TE TAPE BASIC takes the format BASIC takes the format INPUT #n,
INPUTrr, etc. etc ....
If, for any reason, the program execu- If CONT is possible,
Ready
is
dis-
tion
is interrupted, Ready is always played.
displayed.