• Installing/replacing pens
l.
Remove the printer cover and press the PEN CHANGE switch with a ball pen
or
the like; this causes
the
pen holder to move
to
the right side
of
the
printer
for
pen replacement.
2.
Depress the pen eject lever to eject the pen wliich
is
at
the
top
of
the holder. When doing this, rest
your
finger lightly on
top
of
the pen while pushing the eject lever to prevent
it
from falling inside
the
printer.
3. Insert a new pen.
4.
Press the PEN CHANGE switch again to bring
another
pen
to
the
top
of
the holder.
5.
Replace all four pens (black, blue, green and red) in the same manner. When finished, press the
RESET switch to ready the
printer
for printing with the black pen.
Execute the BASIC TEST command to confirm
that
all colors are printed correctly.
Pen position
detection
magnet
Red
Black
Pen
holder
• Replacements for the printer pens (ballpoint pens) can be purchased at the dealer where the printer
was
purchased.
• EA-850B (black; 4 pens)
• EA-850C (black, blue, green, red; 4 pens, 1
of
each color)
112------
------------------------------------------------
----------
----------
To Next Page
Loading...
