Sharp MZ-800 - Page 104

VERIFY
Format
VERIFY ‘‘(CMT]: <filename>”’
Abbreviated Format
Explanation
Example
Vv.
The VERIFY command compares the program in memory with the program writ-
ten on cassette to confirm that the program has been properly saved. ‘*Ready”’ is
displayed if both programs are the same and ‘*CMT:IIlegal data error’’ is displayed
if they are different. In the latter case, save the program again.
Any ASCII file cannot be verified.
This command is valid only for cassette files.
VERIFY ''CMT:NAME"’........ Compares file NAME” on the cassette with the pro-
gram in memory.
Procedure for verifying a program file
VERIFY “'<filename>" (CR) Key in
APLAY ‘Screen display
Press the [PLAY | button. Data recorder operation
+
Found *'<filename>"’ Screen display (the names of program files found are displayed.)
Screen display
Ready
Screen display
Verity An error is detected.
completed. If this message is displayed, retry to save the program file again.
6-47