Sharp MZ-800 - 7.2 Peripheral Devices; 7.2.2 Expansion I;O connector

7.2 Peripheral Devices
Many optional peripheral devices are available, but some of those explained in this manual may not
be available in your country.
Be sure to turn off the power switches of both the MZ-800 and peripheral device when connecting them.
7.2.1 Standard interfaces
The MZ-800 is equipped with the following interfaces as standard.
© CRT display interface
© Keyboard interface
* Data recorder interface
© Printer interface
© Joystick interface
7.2.2 Expansion I/O connector
An expansion I/O connector is provided inside the computer, which can be accessed by removing the
expansion slot cover from the rear panel. This connector is provided for the connection of an optional
interface or expansion unit. The pin assignment of the expansion I/O connector is as follows.
Component side| Solder side
Connector
78
y pret of