Sharp MZ-800 - 8.4 Monitor Commands

8.4 Monitor Commands
L Command
Format
Explanation
Example
L
This command loads a machine language program from the cassette.
When ** 4 PLAY” is displayed on the screen, press the button.
The following example loads a machine language program,
*L
4 PLAY = Press the [PLAY] button on the data recorder.
S Command
Format Ss
Explanation This command saves the specified memory block onto the cassette with specified
filename.
Example The following example saves a machine language program stored in addresses $6000
to $60A3 onto the cassette under the filename “‘MFILE’’. The address from which
the program is to be executed is $6050.
*S
Filename? MFILE [CR ]
Top adrs? 6000 | CR
End adrs? 60A3 | CR
Exc adrs? 6050 [CR |
4 RECORD.PLAY
Press the |RECORD | button
8-5
—————