Sharp MZ-800 - Page 169

pir oe
M Command
Format
Explanation
M <starting address>
This command modifies the contents of memory, starting at the specified address.
Example The following example fills addresses $CO00 to $C002 with the value $FF and ad-
dresses $C010 to $C013 with the value $88.
*Mco00 [CR ]
C000 OO FF
C001 00 FF
C002 00 FF
C003 00 +
*Mco10 [CR |
C010 00 88
C011 00 88
C012 00 88
C013 00 88
014 00 [SHIFT] +
To return to the monitor prompt, press + [BREAK].
J Command
Format
Explanation
Example
J<address>
This command transfers control to the specified address, by loading the < address>
into the program counter of the CPU.
The following example transfers control to address $1200.
*J1200
G Command
Format G<address >
Explanation
Example
This command calls the specified address.
The following example calls address $1200.
*G1200